Distorted Monitor Colors

From time to time, your monitor may inadvertently reset its submenu settings. Your image may look like this:

It is unclear at this time exactly WHAT causes it, but you can fix the issue by following these steps:

USING THE PHYSICAL KEYBOARD ON THE DISPLAY:

1) On the display keypad, hit the INPUT button once

2) Hit the DOWN button x4

3) Now press the INPUT button until you reach USER SET

4) Press UP once

5) Press the INPUT button until you reach Ti BIT MODE.

6) Press the UP button to cycle the settings. Stop when the image looks correct.

7) Press MENU x3 to set

USING THE REMOTE CONTROL THAT WAS SHIPPED WITH THE DISPLAY:

1) Press the RIGHT arrow x1

2) Press the UP arrow x4

3) Press the arrow DOWN until you get to USER SET

4) Press the RIGHT arrow

5) Arrow down until you get to Ti Bit Mode

6) Press the RIGHT arrow

7) Press the RIGHT arrow until the image is clear.

8) Press the MENU button x3 to set

If your display does not react to the initial key presses to get into the sub menu, you likely have an older display with older firmware. Email or call us to get further assistance at +1 201 767 6733 or info@telescript.com.